PIXMA PRO 10 SETUP MAC AIRPORT UTILITY HOW TO
PIXMA PRO 10 SETUP MAC AIRPORT UTILITY INSTALL
PIXMA PRO 10 SETUP MAC AIRPORT UTILITY DRIVERS
PIXMA PRO 10 SETUP MAC AIRPORT UTILITY MANUAL
PIXMA PRO 10 SETUP MAC AIRPORT UTILITY DOWNLOAD

G) At this point you should be asked for the 'driver'. I don't remember, but I may have used the default 'LPD protocol', but i do remember you need to use the IP address from step c).

PIXMA PRO 10 SETUP MAC AIRPORT UTILITY INSTALL

You'll need to install them in that order.Р”Р‡) once done, now go to install a new printer, via preferences/printers/add printer (+).

PIXMA PRO 10 SETUP MAC AIRPORT UTILITY DOWNLOAD

Go to: and download the three pieces of dmg's. At this point i came across the following helpful link from another helpful poster.

PIXMA PRO 10 SETUP MAC AIRPORT UTILITY DRIVERS

Only vista, xp, 2000 and ME are supported' (remember, at this point i'm in a mac laptop, using safari and firefox browser).Р”В®) If you try to now skip the above setup step and go directly into 'add a printer' in your mac, you are likely to fail, as you likely will not have the correct drivers required to run your printer over a print server. After several minutes, if you have the patience, you will be greeted with the error message 'Operating system not supported.

PIXMA PRO 10 SETUP MAC AIRPORT UTILITY MANUAL

At this point, according to the manual you are to click on the 'setup' tab, unfortunately, this does nothing but spin your 'working' icon. You will also see several wireless links on the left hand nav. It indicates information like your print server model, ip address, mac address etc. You did see your dlink in your router dhcp table, so by all accounts you should be able to login.Р”В) If you are now logged on, you immediatly see the status screen. If this is the case, you need to trouble shoot, starting from the physical (always), by testing your cable connections, snap them in again. You may notice that you do NOT have a connection. Make note of your iP given to your dlink.Р”В¬) Now try logging into your dpr 1260 via a browser ( ). At this point, I took a proactive early step and made the dlink dpr 1260 a static ip so that it is not flaky on my network. if not, then do so, it should be self explanatory via a button toggle. This assumes of course that you have dhcp enabled on your router in the first place. In my case it was assigned 192.168.1.120 (within the range that i had earlier set). In my case, 192.168.0.1 and look under dhcp tab/link and once you see a listing of all devices that have had recent dhcp ip's assigned, you will hopefully see one for your new dlink dpr 1260. This much the dlink manual has right.Р”В«) once connected, log into your router's web interface. Printer: HP Office jet j5750 multi functionР”Р„) when installing your dlink print server, you're going to need to physically connect it to your network via cat5 data cable direct to your router and NOT to your computer. I'd love to add to the last post, as I found some further information that you may find helpful.Р”Р‡irst of all, my situation was similar in that i was trying to install the dlink dpr-1260 print server on my home network.

To be able to use the shared scan features, create a bookmark to (e.g., '' for my setup), so you can operate your scanner from a web interface.

In the Device URI field, enter the following: LPD://IP_Address/LPR_queue_name, using the information gathered in step two.

Since my shared multi-function printer is an HP PSC 2110, I simply named mine PSC2110.

In the Device Name field, give your printer any name you want.

In the next dialog box, under Device, choose LPD/LPR Host or Printer.

Hold down the Option key while clicking on More Printers.Open up the Printer Setup Utility (/Applications/Utilities/Printer Setup Utility).

(My router assigned the IP address 192.168.0.100.) On this web page, be sure to note the IP address and LPR queue name.

To make sure your Mac can see the print server, open up your favorite browser, and enter the IP address of your print server, as assigned by DHCP on your router into the URL box.

First, do the initial set up and configuration with a Windows PC, as directed in the included quick start manual.

PIXMA PRO 10 SETUP MAC AIRPORT UTILITY HOW TO

Based on bits I found online, I was able to piece together how to get it to work w/ my MacBook (running 10.4.11): Unfortunately, the Mac documentation for this print server is almost non-existent. I recently purchased a D-Link DPR 1260 multifunction print server, and I've been able to share print and scan functions with both Windows and Mac computers on my home network.

Pixma pro-10 setup mac airport utility